$129 AUD per processor · Version 1.34 · 120-minute free trial · RTI XP processors
Full RTI control for Christie M4K15, M4K25 and Griffyn 4K-RGB laser projectors over TCP/IP. Web Object + hardware-remote Browse Menu + 200+ exposed sysvars.
Full RTI control driver for Christie cinema-grade RGB laser projectors (M4K15, M4K25, Griffyn 4K-RGB family) on the TruLife+ electronics platform. Talks plain TCP/IP to the projector on port 3002 plus an optional HTTP/JSON-RPC arm for listener-push feedback. Three integrator surfaces in one driver: traditional touchpanel widgets, a polished single-page Web Object UI served from the driver itself for iPad and RTiPanel, and a Browse Menu for hardware remotes (ISR-2, ISR-4, IST-5) that don't render Web Objects.
Features
- Power, shutter, freeze, brightness, fan profile, OSD position, stealth mode, auto-power-on
- Image preset recall (1-20) with last-recalled feedback and active-state highlighting
- Input selection with auto-detected per-input-type icons (HDMI, SDI, DisplayPort, HDBaseT, DVI, VGA, USB-C)
- 200+ sysvars exposing every status field the projector reports: temperatures, fan speeds, laser hours, firmware versions, LiteLOC, serial numbers, ambient sensors
- Web Object UI on processor (default port 9040) - polished dark-themed control surface, theme-customisable, works in any browser
- Browse Menu for hardware remotes - list-widget UI with baked-in PNG icons, active-state markers, no external CDN
- Debug console on TCP 12515 for live troubleshooting
- Remote cloud-logging hook for development support (off by default)
- 15-minute trial mode - try it on real gear before buying
- MAC per licence - locked to a single processor MAC, no DRM phone-home
Introduction
Two-way IP control of Christie M 4K and Griffyn RGB pure-laser projectors (TruLife+ electronics) from an RTI processor, written by Smart Home Programming and Automation. The driver talks to the projector's serial command protocol over TCP port 3002 and, optionally, to the projector's own web interface (JSON-RPC over HTTP port 80) for push feedback, image presets and colour/gamma controls. It also hosts a browser control page on the processor and a list-based Browse Menu for hardware remotes.
Driver Features
- Power - on, off, toggle, with four-state feedback (Standby, On, Warming Up, Cooling Down) and a boolean for each state.
- Shutter, freeze, OSD, PIP, test patterns - with feedback.
- Inputs - up to 12 named inputs, selected by index, SIN code, slot/connector or CHA channel, with a boolean per input.
- Brightness (laser power 0-1000), fan profile, OSD position, stealth mode, auto power on, profile recall.
- Lens - zoom, focus and shift jog (hold to move) and absolute positions, with the projector's real travel ranges.
- Monitoring - laser and projector hours, firmware, serial number, CPU and intake temperatures, LiteLOC status (from the projector status query).
- Web control (optional) - push feedback from the projector, image presets 1-20, colour temperature, colour table, gamma, LiteLOC mode, camera-friendly colour, low brightness mode, lens lock, and a generic control passthrough.
- Browser control page hosted on the processor (default port 9040), with themes and per-device section visibility.
- Browse Menu - the same controls as scrollable lists for ISR / T-class remotes and list widgets.
- Remote logging (optional) for remote diagnosis.
Show / Hide the Web Object from a panel
The Web Object Visible variable (and its inverse Web Object Hidden) can drive a layer's visibility. Show / Hide / Toggle Web Object set it from a macro, and the close X on the browser page hides it. It is always written false when the driver loads.
Browse Menu
Bind a list widget to Browse List (tag Browse), a label to Browse Title and an image to Browse Category Icon; wire Back to Browse Back and Home to Show Browse Home. Menus: Power & Shutter, Brightness & Fan, Input Selection, Image Presets, Advanced (OSD position, stealth, auto power on, refresh) and Status.
Lens jog
Jog functions come in pairs: the Down function starts the motor and the Up function stops it. Wire them to the button's press and release.
Supported Devices
- Christie M 4K15-RGB and M 4K25-RGB
- Christie Griffyn 4K32-RGB and other Griffyn RGB models
- Other Christie projectors running TruLife+ electronics (M RGB Series, Griffyn Series, Sapphire 4K40-RGBH)
All of these share the TruLife+ serial command protocol (Christie document 020-103316). Developed against Christie's protocol document and tested on an M 4K25 with firmware current in May 2026. If the projector answers the "(PWR?)" query on TCP port 3002 (see Device Setup), the driver will work with it.
System Requirements
- Integration Designer - 11.4 or above
- RTI processor - XP-8 class (XP-3 / XP-6 / XP-6s / XP-8 / XP-8s / XP-8v)
- Processor script runtime - 24 or above
- The projector on the same network as the processor, with a static IP or DHCP reservation.
Limitations
- The TruLife+ serial protocol is direct control only: there is no keypad or OSD-menu navigation command, so projector menus cannot be driven remotely.
- Image presets 1-20, colour temperature, colour table, gamma, LiteLOC mode, camera-friendly colour, low brightness mode and lens lock need Web Control enabled (projector web interface reachable on port 80 with valid credentials).
- Christie does not report the current image preset, so Last Image Preset shows the preset most recently recalled from RTI, not one recalled at the projector.
- Feedback from the serial connection is polled (default every 10 s for power, shutter and input); turn on Web Control for push feedback.
- The browser page and the Browse Menu icons are served by the processor; the browser page needs Enable Web Object on. RTI list icons are fetched by the panel itself.
- Lens absolute ranges default to +/-1200 (zoom/focus) and +/-2050 (shift) until the projector reports its real travel.
- Not tested on Christie projectors that use the older GS-Series or Crimson command sets.
Related RTI drivers
See all RTI drivers